Results 1 to 8 of 8
Thread: Hall V127 compressor
Hybrid View
-
23-08-2006, 09:09 PM #1
Re: Hall V127 compressor
i used to do several v127 on a site in brum. we never had any special tools as the pulley has a drive hole on the taper to make it easy (still bl***y heavy. ).when you've cleaned and refitted the new seal and pulley turn it over by hand a few times to make sure the seal sits properly.
-
23-08-2006, 09:53 PM #2
Re: Hall V127 compressor
Thanks for the replys i'll keep you all upto date on the job, looks like im going to tackle it myself. Cant wait!!!! LOL
-
15-09-2006, 10:59 PM #3
Re: Hall V127 compressor
Well my compressor repair has dragged on and on and on, i now dont have the time or experiance to repair it so i have decided that im going to sub it out! My question is how long would changing the shaft seal and the oil take? I would have said 1 day max would have it changed and put back together! Any suggestions?
Thanks
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM