Results 1 to 8 of 8
Thread: How do I Recharge-----
-
22-08-2006, 01:59 AM #1
How do I Recharge-----
Is it possible for me, a newby with the basic knowledge, to recharge an upright freezer. It uses 134a with the low side at 120psi. The pump runs but the unit doesn't get cold. Just what do I need to do, other that call a repairman.
Thanks, jack
-
22-08-2006, 01:09 PM #2
Re: How do I Recharge-----
Originally Posted by jacdu
-
22-08-2006, 07:35 PM #3
Re: How do I Recharge-----
The Low Side @ 120psi - on R134a ?
Are you sure?????
-
22-08-2006, 10:29 PM #4
Re: How do I Recharge-----
120psi = probably is the test pressure shown on the label
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
05-09-2006, 11:22 PM #5
Re: How do I Recharge-----
are you sure the compessor is pumping mate?
-
06-09-2006, 04:09 PM #6
Re: How do I Recharge-----
I agree with mr cool, looking at the pt card, it gives me around 98 degrees, if you are in Texas I can believe the ambient for a non running compressor, but if your not that warm, the compressor is running, your in trouble, the running motor is heating up the can, but not pumping anything.
-
09-09-2006, 12:25 PM #7
Re: How do I Recharge-----
Thepump is running????
In a fridge???It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
09-09-2006, 12:31 PM #8
Similar Threads
-
the best way to recharge a VRV/VRF
By marc5180 in forum Technical DiscussionsReplies: 19Last Post: 27-08-2007, 10:59 PM -
Honeywell coolmaster recharge
By autochill in forum Trouble ShootingReplies: 17Last Post: 21-08-2006, 11:09 PM