Results 1 to 29 of 29
Thread: Climaveneta water chillers
Hybrid View
-
06-10-2006, 11:00 AM #1
Re: Climaveneta water chillers
Does anyone know where or maybe have manuals for the climaveneta range of chillers?
It would be appreciated if anyone could help.
Berst Regards
Chopper..
-
06-10-2006, 10:52 PM #2
Re: Climaveneta water chillers
You could try a Google, it does work now and again
Try here...
http://www.climaveneta.it/Technical.46.0.html?&L=2Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-10-2008, 05:18 PM #3
Re: Climaveneta water chillers
Hello mate,
ICS Technical are quite efficient at sending out Climaveneta manuals, I printed it off but forgot to save it!
-
21-11-2008, 11:51 AM #4
Re: Climaveneta water chillers
There is no Technical now, the manager left and they made the other guy redundant??
As for the W3000, this is just their name for the Carel PCO3 hardware. it all depends on the software that is loaded.
Standard passwords are:
USER:1234
UNIT:9990
MAnuf:0000009982
If you ever get the controller reverting to itallian language on version 12 software you will need to replace the controller with version 13r1.
Powermster change their passwords and will not give them to you.
-
04-03-2010, 10:11 AM #5
-
09-03-2010, 05:32 PM #6
Re: Climaveneta water chillers
Hi,
Climaveneta changed their passwords a year or two ago because everyone knew the "1234" and "9990" codes - Climaveneta had to send their people out to many sites to rectify problems with controllers / because people made changes to their controllers and then couldnt understand why the chiller wouldnt work - so now each unit has a specific password up to 13 digits with both upper and lower case letters and also numbers - if you require the password you must request it from Climaveneta and explain what you want to change - good luck.
-
26-05-2010, 01:36 PM #7
Re: Climaveneta water chillers
Hi there ,
I had a recent problem with Climaveneta chiller with W3000 . After condensor pump failure it gave condensor fan failure alarm ?? . Also language reverted to italian which we reverted back to english. But after that we have com failure alarm on expansion module 3 . Infact we ony had one expansion card installed at address 5 and none at 3 . So i think PLC has reverted to default setting of some sort. Later on PLC stopped acceptinp user passwords 1234 , AND MNUFACTURER UNIT PASSWORD 9990 . wHAT SHOULD BE THE PROBLEM ???
-
21-02-2011, 09:02 AM #8
Similar Threads
-
Hoshizaki Ice Maker
By Abe in forum Legal-Business-MarketingReplies: 19Last Post: 01-05-2010, 03:27 AM -
Fact or Fiction
By david.findlay in forum FundamentalsReplies: 40Last Post: 09-03-2009, 06:19 PM -
Carrier Water Chillers
By Latte in forum Air ConditioningReplies: 10Last Post: 11-10-2008, 08:43 PM -
water chillers
By acb in forum Technical SpeculationsReplies: 7Last Post: 22-07-2006, 02:18 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM