Climaveneta water chillers

[Stevek]

i have done alot of work with climaveneta and found it to be ok. As for the hitachi screws leaking on the terminal plate be warned that when pressure testing they have a maximum test pressure of 13kg, exceed this and you pop the seals. As with all italian equipment the condensor coils are prone to leaks.

Try Cutting any pipe cross bonding as the stresses cause fractures, just clamp the discharge if a recip (after the anaconda).

As for Hitachi Screws, take of the terminal plate and tighten up the terminal bolts, this expands the bushes, carefull with the insulators though.