Results 1 to 11 of 11
Thread: Samsung Error codes
-
15-08-2006, 08:53 AM #1
Samsung Error codes
Help !,
I have a samsung HH140ECM that has an error 'E0' on display and i am unable to find and info on the error codes for samsung, even tried samsung and they are not replying.
-
15-08-2006, 09:25 PM #2
Re: Samsung Error codes
Hi, Had a look through my fault codes for Samsung ....its only a poor quality copy I aquired....and E0 isn't on the list but ED is which refers to Outdoor pipe thermister.
I have some info on Trouble shooting using indoor and outdoor pcb's if that would be any help.
Regards
Ian
-
16-08-2006, 04:53 PM #3
Re: Samsung Error codes
That would be great thanks, i have found out that E0 does exisy and it just means a general fault with the outdoor unit.
-
16-08-2006, 08:54 PM #4
Re: Samsung Error codes
Hi Hope these help......
Trouble shooting by outdoor unit error
[b]Error Error Description Check Code[/b]
1 Indoor unit room thermistor Indoor PCB/
Thermistor
5 Indoor unit pipe sensor Indoor PCB/
Sensor
6 Outdoor thermistor/sensor Outdoor PCB/
Sensor
9 Float switch error Drain pump/float
Drain system
DIP switch SW2 of the indoor unit (the 2 and 4 switches must be on)
A communication error indoor/ Inter connect
Outdoor cable
PCB of indoor/
outdoor
C Wired remote comms error Remote controller/
Cable
Main/Sub PCB of
Indoor unit
D Outdoor pipe sensor Outdoor pipe sens
Outdoor PCB
L Three phase power error Incoming supply
( 3 Phase models only) Outdoor PCB
Sorry if this is a bit confusing as far as i can remember the outdoor unit has got a fault indicator on the PCB and the codes above relate to that. The error codes have a two digit format with the first digit indicating the unit address and the second the error code.
Hope this is some help.... Most of the above tend to point to faulty outdoor PCB's as the cause of most faults.
Regards
Ian NeillLast edited by frank; 18-08-2006 at 09:34 PM.
-
17-08-2006, 09:31 AM #5
Re: Samsung Error codes
Ian,
That is fantastic help thanks. Our problem points towards the compressor going out on thermal overload even after cleaning the condensor coil so its time for another call to Samsung !!.
cheers for the help.
Kevin
-
03-09-2006, 09:55 AM #6
Re: Samsung Error codes
I don't want to teach you how to suck eggs, but if the compressor is going out on thermal overload have you checked you gas charge is okay. If you are low on gas this can cause it.
Thanks - MarkyP
-
19-11-2006, 10:15 PM #7
Re: Samsung Error codes
hey kev
if samsung units give you anymore probs send me an email and should be able to help as just moved to a samsung firm(i know but the money is good!!!)
paulPaul
"KEEP IT COOL"
-
08-08-2010, 03:21 AM #8
Re: Samsung Error codes
Hi Ian
i just installed a samsung mini split model AQV12V and when i turned it on a error code E556 came up any thaughts
-
08-08-2010, 05:16 AM #9
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
08-08-2010, 06:18 AM #10
Re: Samsung Error codes
where would i find the set up options
jason
-
08-08-2010, 06:20 AM #11
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Samsung Error codes
If you where posted question in only one thread, you will be already found it.
Similar Threads
-
Samsung Error codes
By kevscontent in forum FundamentalsReplies: 2Last Post: 04-04-2011, 08:08 AM -
samsung
By superswill in forum Trouble ShootingReplies: 4Last Post: 20-07-2006, 09:20 PM -
Leaky Samsung...
By charliepad in forum DomesticReplies: 4Last Post: 08-07-2006, 12:54 AM -
Samsung Domestic nightmare
By andre_fridge in forum DomesticReplies: 7Last Post: 31-05-2006, 10:48 PM -
Anyone tried Samsung yet ?
By eggs in forum Chit Chat & Service StoriesReplies: 16Last Post: 27-09-2004, 10:58 PM