shining fault codes

[al]

Anyone got fault codes for kelvin/shining wireless remote cassette units?

Thanks

Alec

[Peter_1]

KFR-23/26/34GW PANEL D
- room temp sensor error: timer flash 1 time per 8 seconds
- indoor coil temp sensor error: timer flash 2 times per 8 seconds
- indoor fan motor error: timer flash 3 times per 8 seconds
- cooling system error: timer flash 5 times per 8 seconds

KFR-26/34/50GW PANEL V
- indoor coil temp sensor error: 21¡æ and 30¡æ light on£¬ 22¡æ flash
- cooling system error: 21¡æ and 30¡æ light on 25¡æ flash
- room temp sensor error: 21¡æ and 30¡æ light on 23¡æ flash
- indoor coil temp sensor error: 21¡æ and 30¡æ light on 24¡æ flash

KFR-70GW PANEL V
- room temp sensor error: 21¡æ and 30¡æ light on£¬ 22¡æ flash
- indoor coil temp sensor error: 21¡æ and 30¡æ light on 25¡æ flash
- indoor fan motor error: 21¡æ and 30¡æ light on 23¡æ flash
- cooling system error: 21¡æ and 30¡æ light on 24¡æ flash

KFR-23GW PANEL H (the old one)
- room temp sensor error: timer flash 1 time per 8 seconds
- indoor coil temp sensor error: timer flash 2 times per 8 seconds
- indoor fan motor error: timer flash 3 times per 8 seconds
- cooling system error: timer flash 5 times per 8 seconds

KFR-50LW/70LW/120LW
- anti-frozen during cooling:E3
- system protection:E4
- room temp sensor error:E5
- indoor coil temp sensor error:E6
- Outdoor coil temp sensor error:E7
- Overload protection:E2
- E9 High-low pressure switch

KFR-50QW/70QW/120QW
- indoor air inlet temp sensor error: RUN light flash 1 time per 8 seconds
- indoor coil temp sensor error: RUN light flash 2 times per 8 seconds
- cooling system error: RUN light flash 3 times per 8 seconds
- overload protection: RUN light flash 4 times per 8 seconds
- communication error: RUN light flash 7 times per 8 seconds

[al]

Peter

thanks very much, that's sorted the problem!

Al

[GEX]

Bearing in mind that i might sound like an idiot
what exactly does: 21¡æ and 30¡æ light on£¬ 22¡æ flash mean?

thanks
Godwin