Results 1 to 3 of 3
Thread: High cool problem
-
03-08-2006, 08:55 PM #1
High cool problem
High cool problem
Has any one had any dealings with high cool. I've installed a u ceiling mounted unit. i'm getting a fault where the 32 amp breaker is arking i have used 2.5 t+e and 1.5 interconnecting the unit itself was running fine and i had a call to say the ac had taken out the dist board. i took the 32 amp breaker off and it was all carbonised and the dist board is u/s. I managed to get a tempory supply and meggered the unit all fine. But the amps are 19.7 (running) instead of 7.1. When commisioned they were 7.4 i've checked the unit over and all seems fine. Any ideas
-
03-08-2006, 10:23 PM #2
Re: High cool problem
Sounds like a major problem with the compressor, wiring, power supply, capacitor to name but a few.
A slow methodical examination is needed methinks.
Also, welcome to the forum.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
04-08-2006, 06:54 PM #3
Re: High cool problem
Originally Posted by Brian_UK
Similar Threads
-
Strange problem
By Peter_1 in forum ElectricalReplies: 9Last Post: 10-04-2007, 05:19 PM -
Cool Room Problem
By hybridjunction in forum Trouble ShootingReplies: 34Last Post: 31-01-2007, 11:09 AM -
Maxima problem.
By alpha in forum TransportReplies: 6Last Post: 15-08-2005, 12:25 PM