Results 1 to 7 of 7

Thread: An apology.

  1. 28-07-2006, 07:56 AM #1
    slingblade's Avatar
    slingblade
    slingblade is offline Veteran Poster
    Join Date
    Sep 2005
    Location
    uk
    Age
    53
    Posts
    499
    Rep Power
    21

    An apology.



    On the 22-07-06 i made a post in this forum which indicated that Fridgetech Ltd. was in some way related to the works which were being discussed at the time. i wish to point out that this is not the case, and as such offer this new thread as a Formal and total retraction of the comments i made.

    I further wish to apologise the directors and staff of Fridgetech Ltd for any distress and inconvenience caused.
    Apologies also to Webram and the administrators of Refrigeration-engineer.com for any distress and inconvenience caused.
    Rest assured this will not happen again and i trust that this is a satisfactory conclusion for all parties involved.

    Regards to all.


    Takes a licking, keeps on ticking.
  2. 28-07-2006, 08:16 AM #2
    rbartlett's Avatar
    rbartlett Guest

    Re: An apology.

    Indeed it is..

    On this issue in general we must all be aware that whilst we are only talking to a select few (us) the whole world is watching.

    I will PM you

    Cheers

    Richard
  3. 28-07-2006, 12:23 PM #3
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: An apology.

    Thank you Slingblade.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
  4. 29-07-2006, 08:28 PM #4
    Peter_1's Avatar
    Peter_1
    Peter_1 is offline Moderator Site Moderator : and general nice guy
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,630
    Rep Power
    34

    Re: An apology.

    Even if I haven't read the original post of Slingblade, wise decission man.
    We all make mistakes and admitting it in public is never easy but testifies from a good education.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
  5. 30-07-2006, 01:26 AM #5
    Dan's Avatar
    Dan
    Dan is offline Moderator
    Join Date
    Feb 2001
    Location
    Tampa Florida
    Posts
    1,076
    Rep Power
    25

    Re: An apology.

    Thanks, Slingblade.
  6. 30-07-2006, 12:00 PM #6
    Andy's Avatar
    Andy
    Andy is offline VIP Poster
    Join Date
    Jun 2001
    Location
    N.Ireland
    Age
    50
    Posts
    1,630
    Rep Power
    24

    Re: An apology.

    Slingblade

    thank you

    Kind Regards Andy
    If you can't fix it leave it that no one else will:rolleyes:
  7. 30-07-2006, 01:16 PM #7
    WebRam's Avatar
    WebRam
    WebRam is offline Administrator Boss of RE : and always up for a bribe
    Join Date
    Jan 2001
    Location
    Fife, Scotland.
    Age
    66
    Posts
    1,103
    Blog Entries
    2
    Rep Power
    20

    Re: An apology.

    Thanks Slingblade.
    I will close this thread now, its served its time and we should now get on with the site
    <img src=http://www.refrigeration-engineer.com/forums/image.php?type=sigpic&userid=1&dateline=1296159097 border=0 alt= />
« Previous Thread | Next Thread »

Similar Threads

  1. charging R410a
    By cikku in forum Refrigerants
    Replies: 25
    Last Post: 05-12-2005, 12:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules