Results 1 to 1 of 1
  1. 18-01-2002, 05:16 PM #1
    mepgkyc's Avatar
    mepgkyc Guest

    Question Calculating Cabinet Temperature?



    I have a supermarket display cabinet question, I am hoping you can help.

    Question:
    From my understanding the Display Cabinet Temperature is calculated based on the weighting that is placed on the Air On and Air Off temperatures. Sometimes the weighting is 50% by 50% and sometmes it is 30% by 70%. So if the measured Air On temperature is 10 degC and Air Off temperature is -8 degC, based on 50%/50% weighting gives a cabinet temperature of 1 degC. If weighting is 30%/70% then cabinet temperature is -2.6 degC. Is this a gemmick or is there a specific reason to this.

    Thanks

    Best Regards

    Yoong
    mepgkyc@brunel.ac.uk
    Last edited by mepgkyc; 18-01-2002 at 07:19 PM.


« Previous Thread | Next Thread »

Similar Threads

  1. CARE refigerants by BOC
    By dogma in forum Refrigerants
    Replies: 8
    Last Post: 23-03-2010, 12:39 PM
  2. re ref. circuit
    By shsalameh in forum Fundamentals
    Replies: 5
    Last Post: 06-08-2007, 12:59 PM
  3. Q=? h1=? mechanical schematics
    By fridg in forum Technical Speculations
    Replies: 22
    Last Post: 19-03-2006, 01:43 PM
  4. Article in ACH&R News
    By Gary in forum Fundamentals
    Replies: 8
    Last Post: 20-05-2003, 12:27 AM
  5. TEV with MOP: how to keep valve body temp above bulb temp?
    By DaBit in forum Fundamentals
    Replies: 5
    Last Post: 16-10-2002, 12:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules