Results 1 to 11 of 11
Hybrid View
-
17-01-2002, 08:37 PM #1
VIP Poster
- Join Date
- Apr 2001
- Location
- New Port Richey, Florida - USA
- Age
- 79
- Posts
- 5,071
- Rep Power
- 35
That's true, Frank. But these two factors must be considered for each of the heat exchangers. If the incoming tap water is above 15C, the chiller doesn't stand a chance. In fact, to achieve the 15C target, the tap water should be 10C or less.
Last edited by Gary; 17-01-2002 at 08:46 PM.
Similar Threads
-
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM -
High temperature particulate cooling
By Reeferjon in forum IndustrialReplies: 13Last Post: 19-09-2005, 12:12 PM
