Results 1 to 2 of 2
Thread: Whirlpool K40
-
19-12-2023, 03:32 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Dec 2023
- Location
- United Kingdom
- Posts
- 1
- Rep Power
- 0
Whirlpool K40
New Here.
Replaced the solonoid inlet but the ice machine still dumping more water than usual. Still making ice but flooding my cellar. It dumps after the ice slides on to the cutter grid. Any advice?
Cheers
MGW
-
19-12-2023, 08:56 PM #2
Veteran Poster
- Join Date
- Feb 2011
- Location
- scotland
- Posts
- 452
- Rep Power
- 17
Re: Whirlpool K40
Sometimes when the temperature of the room the ice machine is in gets too cold, it can cause the harvest/ice release cycle to run too longer. Which I think is when the water inlet valve is opened.
If the machine is making the ice to the right thickness you want. You can try blocking up half of the condensor coil with a bit of cardboard, to try and speed up the harvest/ice release cycle.Last edited by seanf; 20-12-2023 at 10:09 PM.
Interested to hear about opportunities to learn - linkedin.com/in/s34nf
Reply With Quote
