Results 1 to 50 of 72
Hybrid View
-
20-02-2002, 04:44 AM #1
"It's obvious that we are talking about a domestic freezer.
The pool of water under the freezer tells us that the insulation is U/S.
This is the reason that the thermostat will not respond"
Have you checked this yet!!!
The reason the compressor cut off on it's klixon was, the time that you left before switching back on was not long enoughto allow the refrigerant to eqaulize
accross the cap tube.
As the other guys are saying it souds like you should either get a tech to look' or DUMP and BUY NEW.
Similar Threads
-
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
R507 in an R134a compressor: system design
By DaBit in forum Technical SpeculationsReplies: 17Last Post: 01-05-2003, 09:25 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM