Results 1 to 5 of 5
Thread: Frick: Tdsh 283
-
19-01-2024, 03:20 AM #1
Frick: Tdsh 283
Hi All,
Does anyone have a manual / procedure to carry out an end float check on a TDSH 283 Screw Compressor.
-
19-01-2024, 09:47 AM #2
Re: Frick: Tdsh 283
GrantD,
Is that on the package, or apart in the workshop?
Check your mailLast edited by RANGER1; 19-01-2024 at 10:40 AM.
-
21-01-2024, 07:55 PM #3
Re: Frick: Tdsh 283
GrantD,
Have you checked your email?
-
22-01-2024, 10:20 PM #4
Re: Frick: Tdsh 283
Hi Ranger,
Apologies... haven't logged in for a few days. The compressor is on the package on site but easily accessible as the package has a vertical oil separator and compressor on base frame at floor level-ish.
I received the emails - thanks. Cant open the files but I think my MAC has something to do with it. Will try with another PC.
Thank you - much appreciated.
-
23-01-2024, 03:22 AM #5
Re: Frick: Tdsh 283
GrantD,
Just a link from my Onedrive.
The on site procedure a bit of a joke, push/ pull male rotor only.
No simple way of checking thrusts, not designed to do so like Mycom, Howden, Grasso.