Results 1 to 4 of 4
Thread: Nitrogen brazing on open lines
-
05-07-2023, 06:51 PM #1
Nitrogen brazing on open lines
Can anyone shed light on any fittings available to hook up to open lines were the outside unit isn’t fitted yet . So basically to braze on the outlet lines of the indoor unit only.
-
05-07-2023, 08:53 PM #2
Re: Nitrogen brazing on open lines
You shouldnt need a high pressure, so you might be able to just tape a gauge hose in/on the pipe. If the hose end is too big, connect a shrader valve with a copper tail to the gauge hose.
-
10-07-2023, 09:45 PM #3
Re: Nitrogen brazing on open lines
Thanks I’ll try that
-
16-07-2023, 04:30 PM #4
Re: Nitrogen brazing on open lines
Got one of these thingies but was much cheaper, think had to import it from the States,
https://www.amazon.co.uk/Nitrogen-Pu...s%2C204&sr=8-4Mostly found in Oxfordshire, UK :)