Results 1 to 4 of 4
Thread: Heat load and capillary tube
Threaded View
-
25-04-2023, 02:13 AM #1
Heat load and capillary tube
Hey guys, I'm trying to calculate the capillary tube size for my project but I'm not sure I'm entering the correct data into the Secop tool because the recommended capillary size seems kinda off. Am I wrong assuming that I can treat the cooling capacity as heat load on this tool? The other data is correct because I need to aim for -35 C for the evaporator and +35 C for the condenser. Thank you!
2345823534987.jpeg