Results 1 to 4 of 4
Thread: Helo friends
-
06-07-2006, 09:41 AM #1
Helo friends
Hi,
i was wondring that some one know formula to calculate the suction and discharge pipe size in refrigeration, we use some tables but i was wondring if some one remember from school or???
For exampel calculate a suction line for R507 for a 20 kilowatt compressor for -10 c in evaprator and 40 c in condesator
thanks
-
06-07-2006, 10:54 PM #2
Re: Helo friends
It rather depends on the gas return speed that you require.
Download Coolpack calculation program to help with your calcluations.
http://www.et.web.mek.dtu.dk/Coolpack/Brian - Newton Abbot, Devon, UK
Retired March 2015
-
07-07-2006, 08:17 PM #3
Re: Helo friends
Or Danven from Danfoss. It's free.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
07-07-2006, 09:22 PM #4
Re: Helo friends
Hi besh3333,
We discussed this in another thread.
http://www.refrigeration-engineer.co...=pressure+drop
Some of the addresses shown will describe the calculation procedures.
Similar Threads
-
For all my friends
By shogun7 in forum Tools and CalculatorsReplies: 0Last Post: 26-01-2005, 05:25 AM