Results 1 to 4 of 4
Thread: Taylor C602
-
20-04-2021, 12:31 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Apr 2021
- Location
- UK
- Posts
- 1
- Rep Power
- 0
Taylor C602
Hello all,
First post here,
I have a Taylor C602 and recently I’ve been losing a lot of money on it,mostly all on the shake side, I’ve had it serviced twice recently by two different engineers, I’ve replaced all the parts and bought a brand new pump and still have the same issue.
Does anyone know what the best steps are or is there anything that you recommend when talking to the engineers to check or look out for?
Any advice or tips is greatly appreciated
Thanks
-
20-04-2021, 04:09 PM #2
VIP Poster
- Join Date
- May 2012
- Location
- England
- Age
- 59
- Posts
- 1,528
- Rep Power
- 36
Re: Taylor C602
.
Is this the McDonalds one?
I have only ever worked on the fridge side so I'm not qualified to make a comment.
But I have found in commercial equipment sometimes they just become not cost effective.
No help I'm affraid.
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
20-04-2021, 04:11 PM #3
VIP Poster
- Join Date
- May 2012
- Location
- England
- Age
- 59
- Posts
- 1,528
- Rep Power
- 36
Re: Taylor C602
.
Taylor C602.
http://www.tcmcd.co/MANUALS/C602op0.pdf
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
20-04-2021, 05:37 PM #4
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Taylor C602
Apart from saying that you are losing money on the machine you haven't actually stated what is or has been wrong with it.
It seems that you really need to find a friendly McD engineer.Brian - Newton Abbot, Devon, UK
Retired March 2015
