Results 1 to 2 of 2
Thread: Tube cutter Refco
-
08-03-2021, 06:41 PM #1
Tube cutter Refco
Hi Guys!
I have old tube cutter Refco, smaller one, 3-22mm; 1/8to 7/8OD. Did anyone have changed cutter wheel? Did I must change element with wheel?DSC_0029.jpg
jest dobrze ale nie jest najgorzej
-
11-03-2021, 11:59 PM #2
Re: Tube cutter Refco
What do you mean by element? Usually you just change the worn cutting wheel.
Mostly found in Oxfordshire, UK :)