Results 1 to 2 of 2
Thread: smeva cabinets
-
20-06-2006, 11:05 PM #1
smeva cabinets
would like to know if any one has worked on a smeva display firdge cabinets (mostly the vision models) having slight problem with keeping a food core temp lower than 4 degrees c . Getting my coil temp to around -11 and the air off at -6.5 with the air on at 3.4 . But still having a food core temp at 4.
-
23-04-2009, 06:26 PM #2
Re: smeva cabinets
Mike
I know this is an old post but had you any luck resolving this, i'm having a similar problem on a vision serve over.
al
Similar Threads
-
Virtualising Cabinets
By Mark in forum Supermarket RefrigerationReplies: 7Last Post: 22-04-2006, 11:39 AM -
sizing of low temp refrigeration cabinets
By DALO in forum Technical SpeculationsReplies: 4Last Post: 15-01-2006, 08:31 PM -
Driers blocking on Cornelius bottle cabinets
By phil68 in forum Trouble ShootingReplies: 3Last Post: 29-12-2005, 09:21 PM -
Has anybody come accross Pennines cabinets?
By rikfridge in forum CommercialReplies: 1Last Post: 06-09-2005, 10:03 PM