expansion valve

[skyboy6142]

Dear guys,
Suppose that we have two containers, One of them empty and the other one has for example 500 PSI pressure.
We link them via a thermostatic expansion valve or via capillary tube or orifice.
I have a simple question, After couple of hours pressure of both of containers should be same or not ?

1 – If after a while pressure of these two containers would be same :
If this is true, How a regulator of capsule of nitrogen works that drop pressure 120 bar to for example 200 PSI ?
My friend told me structure of that is such as expansion valve contains a cone needle.

2 – If after a while pressure of these containers would not be same :
If it is true, When we turn a system off, How pressure of two side of low and high pressure reach to each other after a couple of hours ?

Thanks for participating to this material.

[Brian_UK]

Another college test question??

[Josip]

Dear guys,
Suppose that we have two containers, One of them empty and the other one has for example 500 PSI pressure.
We link them via a thermostatic expansion valve or via capillary tube or orifice.
I have a simple question, After couple of hours pressure of both of containers should be same or not ?

1 – If after a while pressure of these two containers would be same :
If this is true, How a regulator of capsule of nitrogen works that drop pressure 120 bar to for example 200 PSI ?
My friend told me structure of that is such as expansion valve contains a cone needle.

2 – If after a while pressure of these containers would not be same :
If it is true, When we turn a system off, How pressure of two side of low and high pressure reach to each other after a couple of hours ?

Thanks for participating to this material.

Watch this training video....
https://www.youtube.com/watch?v=UfaucxS5rIc

and read this page....
https://www.bermad.com.au/how-to/how...ng-valve-work/

and this one too
https://industry.airliquide.co.za/si...age-regulators

Best regards, Josip

[skyboy6142]

Watch this training video....
https://www.youtube.com/watch?v=UfaucxS5rIc

and read this page....
https://www.bermad.com.au/how-to/how...ng-valve-work/

and this one too
https://industry.airliquide.co.za/si...age-regulators

Best regards, Josip

thanks for your help