Results 1 to 19 of 19
-
22-08-2020, 09:24 PM #1
Urgently need to replace broken hose Duct for Matsui MPA7KWR
hi, I don't have the manual, matsui parts don't exist anymore. I can't find out anywhere on the internet what size the duct is to replace it.
I measured diameter by myself, but it shows 3.8-4.2" because the hose edges zig-zag in size, like an accordion.
My hose has torn in the middle.
Does anybody know what size and where I can replace it urgently?
-
23-08-2020, 12:20 AM #2
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Try Amazon, they have various sizes available.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
23-08-2020, 10:31 AM #3
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Last edited by nike123; 23-08-2020 at 10:38 AM.
-
23-08-2020, 10:38 AM #4
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
.
I put that make and number in Google and came up with a manual and a selection of hoses for less than £20.
Rob.. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
23-08-2020, 10:40 AM #5
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
.. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
23-08-2020, 02:26 PM #6
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
So did I Rob, sadly no response yet from OP.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
23-08-2020, 03:34 PM #7
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Last edited by Hmpto; 23-08-2020 at 04:41 PM. Reason: spelling and updates
-
23-08-2020, 07:52 PM #8
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Your hose size will be 4" according to the measurements that you have taken.
Assortment here from Amazon.....
https://www.amazon.co.uk/s?k=Flexibl...f=nb_sb_noss_2Last edited by Brian_UK; 23-08-2020 at 07:57 PM.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
23-08-2020, 09:24 PM #9
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
I'd like to make sure of the size, required, because my measurement as a range not a fixed number.
Also, the baggy ones will tear. I need a semi-flexible plastic one like the original.
-
23-08-2020, 09:56 PM #10
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Well measure the size of the fitting that the hose goes into.
There are only so many sizes, the manufacturer's are unlikely to waste money going for a non-standard size.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
24-08-2020, 02:34 AM #11
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Thanks!
I measured the connector to be 4.8" and luckily found & ordered the 4.7" https://www.amazon.co.uk/Aluminium-F...8232785&sr=8-6
-
27-08-2020, 07:51 PM #12
-
28-08-2020, 12:12 AM #13
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Try tumble drier spares perhaps.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
29-08-2020, 12:56 AM #14
-
29-08-2020, 11:19 AM #15
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Have you thought of using duct tape to fix it?
-
29-08-2020, 11:43 AM #16
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Just buy the 5" and tighten it up with a worm drive clip.
-
29-08-2020, 02:28 PM #17
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
The factory hose is a semi-flexible, so every time I contort and accordion it, the tape will come off, because a whole line has torn at two ends.
-
29-08-2020, 02:29 PM #18
-
29-08-2020, 06:56 PM #19
Re: Urgently need to replace broken hose Duct for Matsui MPA7KWR
Click here.
https://bfy.tw/Ougn
You even get joining tape.Brian - Newton Abbot, Devon, UK
Retired March 2015