Results 1 to 3 of 3
-
17-08-2020, 01:40 AM #1
FES Micro III - backing up controllers?
We have a client with an FES Micro III. How would one back up the programming/configuration or review the control strategies?
Their system is rather old, and we're concerned about being able to restore the system if any of the hardware fails. Also, the client doesn't really know how the system is set up, so maintenance has been an issue.
Any help that people can provide would be most appreciated.
Joe
-
17-08-2020, 09:48 AM #2
Re: FES Micro III - backing up controllers?
Joe,
Maybe contact Genemco for advice.
I’m thinking they will want to sell upgrade though.
http://www.genemco.com/catalog/pdf/M...ntrolPanel.pdf
http://www.genemco.com/catalog/pdf/H...ntrolpanel.pdf
http://www.refrigeration-engineer.co...-FES-Micro-IIILast edited by RANGER1; 17-08-2020 at 10:19 AM.
-
17-08-2020, 03:06 PM #3
Re: FES Micro III - backing up controllers?
I made it a habit to go through the panels and write down all the settings on a customers machine, in case of a failure. Got me out of a lot of trouble when I made an error updating the software a Frick.