Results 1 to 2 of 2
-
22-04-2020, 05:59 AM #1
Registered User
Hey, I am new to : RE
- Join Date
- Apr 2020
- Location
- Bulgaria
- Posts
- 2
- Rep Power
- 0
Samsung AQV12VBAN with remote ARH-1362 Heat mode disappeared (not available any more)
Hello, on a Samsung AQV12VBAN with remote control ARH-1362, the heat mode disappeared - when switching modes they go Auto-Cool-Dry-Fan-Auto-Cool...... and so on. The customer said something that 8ths came on the screen and then the heat mode disappeared. I opened the remote, and on the PCB there are some places to solder between (sw1-sw11), but I can't find any info on them. Can anyone help me on this, I know it's already an old model, but it's still running good
IMG_20200420_102145.jpg
IMG_20200420_102029.jpgLast edited by astralrs; 22-04-2020 at 07:11 AM.
-
22-04-2020, 01:16 PM #2
Registered User
Hey, I am new to : RE
- Join Date
- Apr 2020
- Location
- Bulgaria
- Posts
- 2
- Rep Power
- 0
Re: Samsung AQV12VBAN with remote ARH-1362 Heat mode disappeared (not available any m
I fixed it, sorry to bother you guys. The small 0 Ohm resistor that can be seen on the photo is there by default, and I didn't see that it is sw1, and didn't measure it, now after I did so, it showed resistance around 350k. Removed it and soldered the two joints together and the remote is back to normal.
