});


Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,714
    Rep Power
    30

    Danfoss ICFE 20 polymer seat



    If anyone can help, Interested in torque value for polymer seat.
    Not in instructions with valve kit.
    Thanks



  2. #2
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,151
    Rep Power
    44

    Re: Danfoss ICFE 20 polymer seat

    Hi Ranger

    I found this instruction leaflet which includes torque settings http://files.danfoss.com/TechnicalIn...T0C402_ICF.pdf
    I'm back on the Pale

  3. #3
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,714
    Rep Power
    30

    Re: Danfoss ICFE 20 polymer seat

    Thanks Frank,
    Unfortunately cannot find the torque setting for ICFE 20 item 6 on page 7.
    Frustrating as lots of instructions, but not there.
    Apparently you have to break a seat to find out that they are not much more than finger tight, otherwise snap off.

    Thanks again

  4. #4
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,714
    Rep Power
    30

    Re: Danfoss ICFE 20 polymer seat

    2nm apparently!!

  5. #5
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,151
    Rep Power
    44

    Re: Danfoss ICFE 20 polymer seat

    Finger tight might just be a touch too much😁
    I'm back on the Pale

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •