Results 1 to 5 of 5
Thread: Danfoss ICFE 20 polymer seat
-
08-04-2019, 08:33 AM #1
Danfoss ICFE 20 polymer seat
If anyone can help, Interested in torque value for polymer seat.
Not in instructions with valve kit.
Thanks
-
08-04-2019, 11:44 AM #2
Re: Danfoss ICFE 20 polymer seat
Hi Ranger
I found this instruction leaflet which includes torque settings http://files.danfoss.com/TechnicalIn...T0C402_ICF.pdf
-
08-04-2019, 08:59 PM #3
Re: Danfoss ICFE 20 polymer seat
Thanks Frank,
Unfortunately cannot find the torque setting for ICFE 20 item 6 on page 7.
Frustrating as lots of instructions, but not there.
Apparently you have to break a seat to find out that they are not much more than finger tight, otherwise snap off.
Thanks again
-
29-04-2019, 08:36 PM #4
Re: Danfoss ICFE 20 polymer seat
2nm apparently!!
-
29-04-2019, 08:39 PM #5
Re: Danfoss ICFE 20 polymer seat
Finger tight might just be a touch too much😁