});


Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,671
    Rep Power
    30

    Danfoss ICFE 20 polymer seat



    If anyone can help, Interested in torque value for polymer seat.
    Not in instructions with valve kit.
    Thanks



  2. #2
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,140
    Rep Power
    44

    Re: Danfoss ICFE 20 polymer seat

    Hi Ranger

    I found this instruction leaflet which includes torque settings http://files.danfoss.com/TechnicalIn...T0C402_ICF.pdf
    I'm back on the Pale

  3. #3
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,671
    Rep Power
    30

    Re: Danfoss ICFE 20 polymer seat

    Thanks Frank,
    Unfortunately cannot find the torque setting for ICFE 20 item 6 on page 7.
    Frustrating as lots of instructions, but not there.
    Apparently you have to break a seat to find out that they are not much more than finger tight, otherwise snap off.

    Thanks again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •