Results 1 to 4 of 4
Thread: Howden WRV 255
-
07-04-2019, 06:52 AM #1
Howden WRV 255
For a chiller water application Howden state oil pressure to be 200 kPa over discharge and fault at 100 kPa over discharge. Would there be any detriment to the compressor if the oil pressure was run at 300kPa over discharge?
-
Re: Howden WRV 255
No problem, max gas oil diff as recommended by Howden is 500 kPa.
(can't share the document where it says)-Cheers-
Tycho
-
09-04-2019, 06:58 AM #3
Re: Howden WRV 255
Thanks Tycho, just what I needed to know
-
09-04-2019, 02:13 PM #4
- Join Date
- Sep 2009
- Location
- Iran
- Age
- 66
- Posts
- 672
- Blog Entries
- 1
- Rep Power
- 19
Re: Howden WRV 255
hi
the temperature of oil also viscosity of that effect to that difference
High temp low difference and
high viscosity high difference (but should be in manufacture recommended compressor rang )