Results 1 to 6 of 6
Thread: Carel PCO - programming
-
10-02-2019, 08:41 AM #1
Carel PCO - programming
Hello !
Is there someone who can programm Carel PCO 2 ?
I have a Blue Box chiller which were vandalism and stealing the PCO and EEV Drivers .
I have used PCO2 which come from another chiller but will need to reprogramm to fit this Blue Box chiller .
I have full electrical diagram of the chiller + PCO2 controller + PGD keyboard + EEV carel Driver
-
11-02-2019, 10:20 AM #2
Re: Carel PCO - programming
Blue box chillers use a proprietary software solution. So if the used pCO2 is not of the similar chiller you will not be able to fit it.
-
12-02-2019, 08:23 PM #3
Re: Carel PCO - programming
Phone swegon they will have to get the correct pco from italy could be a wait mind
-
30-04-2019, 09:02 AM #4
Re: Carel PCO - programming
pCO2 are really old now and have been superceded twice ! not gonna be a simple plug in plug out solution for this one as you'll need a newer generation pco5+ controller to be configured and set up from scratch.
-
03-09-2019, 12:08 PM #5
Re: Carel PCO - programming
You can use pco key to download and upload software , see attached
-
12-09-2019, 01:14 AM #6
Re: Carel PCO - programming
Can you provide more details
you can transfer a pco from one chiller to another as long as its the same chiller also bear in mind most chillers will have a slave and master
you can also down load the software using the pco key as its a pco two you will need the plug in type not the mouse thats for pco 3 and current
also pco two is now obsolete if you are in need on a new one i have 4 brand new ones