Results 1 to 4 of 4
-
17-01-2019, 08:56 AM #1
Time needed for air compressor to reach 10 bar
Dear colleagues
I will like to calculate the time needed for air compressor (38 m3/m) to fill air receiver 500 lt at pressure 13 bar. and I don't know the formula.
Does any one know the formula?
Best Regards
Andreas Kaskiris
-
17-01-2019, 04:12 PM #2
Re: Time needed for air compressor to reach 10 bar
A very difficult question to answer from what I've just read on the internet.
For a start, what is the pressure when the compressor is delivering the 38m³ ?Brian - Newton Abbot, Devon, UK
Retired March 2015
-
18-01-2019, 10:08 AM #3
Re: Time needed for air compressor to reach 10 bar
The pressure when the compressor is loading (deliver air ) to fill the 500lt air receiver the pressure is zero bar.
Thanks for the reply.
-
18-01-2019, 02:47 PM #4
Re: Time needed for air compressor to reach 10 bar
Sorry, I gave an unclear question.
At what pressure does the compressor give the rated flow rate?
If it does 38m³ at 5bar then it is undersized.Brian - Newton Abbot, Devon, UK
Retired March 2015