Results 1 to 4 of 4
-
05-12-2018, 06:26 PM #1
Toshiba wall unit lost ability to heat
Hi
Call out to Toshiba wall unit RAV-SM562KRT-E not heating.
While cycling through the controller the heat symbol is missing and went into the system configuration menu, 0F-heat mode to select available but after saving this setting and going into the config. the controller shows 0001 unavailable
The controller is RBC-AM31e
I'm Stuck.. any advice
FIXIT............first time every time
-
05-12-2018, 09:38 PM #2
Re: Toshiba wall unit lost ability to heat
I dont know much about Toshiba units, but i do have a service manual for the above unit which i can send over to you in pdf if that would be any help?
-
18-12-2018, 11:51 AM #3
Re: Toshiba wall unit lost ability to heat
Hi FIXIT,
In my opinion there are three menus you need to check \ set up for all modes to be available.
0d = 0000 (auto mode available)
0F = 0000 (heat mode available)
2d = 0015 (all modes available)
GT Phelans in Bray should be able to help you - they're the Toshiba distributor for Eire
Regards
Loops
-
19-12-2018, 10:39 AM #4