Results 1 to 7 of 7
-
20-10-2018, 12:01 AM #1
yellow jacket recovery machine 95760 rebuild?
I needing to rebuild my yellow jacket XLT recovery machine. model 95760, I have the owners manual with ID parts and numbers. it's like giving a kid a box of parts and telling him to go rebuild his car. something he's never done before. I know there are tech who would no doubt laugh at my dilemma, But I realize everybody has to start somewhere. so... I'm starting right here.
I know there some very professional people who know more about this than I ever will, could anyone give me a site or some directions, that will walk me through this for the first time?
I called my part supplier for a rebuild kit on this unit, he said he didn't have one, but if I gave him the part numbers, he could locate them for me. as if I had any idea what parts I was needing or what they even looked like. if I knew all of that I would order them myself!
this is kind of embarrassing to say the least. but it is where I am at. so I'm making the best of it and doing my best.
thank you in advance to anyone who could give me some advice on this issue. Jovanna.
-
20-10-2018, 08:11 AM #2
Re: yellow jacket recovery machine 95760 rebuild?
Why not contact them direct.
They can only say no, or have a repair service.
https://yellowjacket.com/support/technical-questions/
-
20-10-2018, 02:28 PM #3
Re: yellow jacket recovery machine 95760 rebuild?
Daft questions maybe but ---- why does it need rebuilding, what's not working, is it electrical or mechanical?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
22-10-2018, 04:17 PM #4
Re: yellow jacket recovery machine 95760 rebuild?
the machine wont pull a vacuum. turn it on with your finger over the suction, and nothing. I checked the inlet screen, it had some small amount of junk, but otherwise it was pretty much open.
this machine was here when I came on board three years ago. it s is about ten yrs old. the former employee told me it was a piece of junk. I think it can be fixed.
-
22-10-2018, 04:18 PM #5
Re: yellow jacket recovery machine 95760 rebuild?
the motor turns on. but nothing else happens. I checked the inlet screen.
-
22-10-2018, 06:25 PM #6
Re: yellow jacket recovery machine 95760 rebuild?
After 10 years of use you should buy a new one.
Getting it fixed might cost more and it will never run like new.
-
23-10-2018, 09:41 AM #7
Re: yellow jacket recovery machine 95760 rebuild?
More than likely broken suction &/or discharge valves.
From these instructions no breakdown of parts for compressor.
I suggest pull it apart & investigate, as sounds like you have nothing to lose.
https://www.instrumart.com/assets/Yellow-Jacket-Recover-XL-XLT-Manual.pdf