Results 1 to 5 of 5
Thread: MyPro with BAS
-
31-10-2018, 05:49 PM #1
MyPro with BAS
Hi everyone!
I am just curious, how you connect MyPro CP1A to the BAS MicroNet MNL 800-101 with a LON connection?
Thanks!
-
01-11-2018, 01:57 AM #2
Re: MyPro with BAS
Howdy,
Page 99
Then page 103 onward
https://www.mayekawausa.com/pdf/tech...P1A_manual.pdf
Happy tinkering!
-
01-11-2018, 12:05 PM #3
-
01-11-2018, 07:05 PM #4
Re: MyPro with BAS
.
Are you guys speaking English?
Or a version of Swahili and Martian??
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
01-11-2018, 11:13 PM #5
Re: MyPro with BAS
Hey,
The Mypro talks with RS-485
Mostly at your computer you will want 232 or Ethernet or USB
Just Google “rs-485 converter”
There are many choices & not all are expensive
Enjoy
Ps, whilst you could probably use Lon, again it’s just another conversion - there are likely several ways to pull the data
Something like this;
3321ED56-0335-4232-9186-A9D78911C779.jpgLast edited by HVACRsaurus; 01-11-2018 at 11:25 PM.