});


Results 1 to 4 of 4

Thread: Sanyo remote

  1. #1
    Join Date
    Jan 2005
    Location
    Ireland
    Age
    38
    Posts
    87
    Rep Power
    16

    Sanyo remote



    Hi Guys

    I have an old Sanyo split (407c) spw-cr363ehl8 didnít make a note of the indoor . When the controller is turned on it runs for 10 seconds and powers down. No attempt for indoor or outdoor to run, even on fan only. Checked voltage at remote 12v ok. Suspect faulty controller. rcs-sh80tg



  2. #2
    Brian_UK's Avatar
    Brian_UK is online now Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    70
    Posts
    10,719
    Rep Power
    52

    Re: Sanyo remote

    Could be but have you followed the fault finding schedule in the manual?
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
    Please support http://the100project.net/Home

  3. #3
    Join Date
    Jan 2005
    Location
    Ireland
    Age
    38
    Posts
    87
    Rep Power
    16

    Re: Sanyo remote

    I did , which lead me to the faulty remote. Just wanted to see if anyone has had this issue before and maybe there’s was an underlying problem.

  4. #4
    Join Date
    May 2006
    Location
    Hayling Island, UK
    Age
    55
    Posts
    135
    Rep Power
    16

    Re: Sanyo remote

    Check the on\off button isn't trapped under the cover, causing it to turn off.
    Also look to see if an accessory called T10 (6 wired plug on the indoor board) is installed. This is to connected an external time-clock, if the time-clock has been removed the T10 contacts might signal to stop the unit and would shut the unit off.
    Regards
    Loops

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •