Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2011
    Location
    spain
    Age
    58
    Posts
    35
    Rep Power
    0

    Room temp display on ducted system



    I've installed a ducted system in an apartment. The manufacturer is Giatsu which is Spanish based. The wired control display only shows SET temp and not ROOM temp. I suspect there is a switch setting on the PCB which changes where the temp is measured and think this just needs changing. Unfortunately, Giatsu is proving difficult to contact, however the PCB is exactly the same as a Hisense ducted and so I'm presuming the switch will be similar. Does anyone know which switch button to press?



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    70
    Posts
    10,643
    Rep Power
    52

    Re: Room temp display on ducted system

    Have you contacted Hisense yet?
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
    Please support http://the100project.net/Home

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •