Results 1 to 6 of 6
Thread: Legal or no ?
Hybrid View
-
10-07-2018, 09:43 PM #1
Legal or no ?
Went to a site today where the inhouse engineer has starting swapping condensor fans to sea if he could get it running
The gent has no f gas or refrigeration background can he legally work on a 7 kws split cassette i admit he does not seem to touch the refrigerant side of things that i no off but he has been playing electrical wise many thanks charlie
-
10-07-2018, 10:14 PM #2
Re: Legal or no ?
I would say no, he should not be working on the equipment.
Start reading here..... lots of angles but same answer.
https://www.gov.uk/guidance/qualific...ntaining-f-gasBrian - Newton Abbot, Devon, UK
Retired March 2015
-
12-07-2018, 01:29 AM #3
Re: Legal or no ?
So if I call a sparky in he cannot touch it even if he certs,forgive me but he is more qualified than me in electrics ? or have i misread?
-
12-07-2018, 05:49 AM #4
Re: Legal or no ?
Looking at the link Brian posted it is not clear if the Catagory 1 cert covers Automotive. Does Automotive need a seperate cert?
-
18-07-2018, 08:02 PM #5
Re: Legal or no ?
I queried this type of activity with REFCOM and they simply stated the part of the legislation which says yes he can ( I can find in a previous email if you would like) fan motors filters and any non evasive refrigerant circuit work
-
20-07-2018, 07:10 AM #6
Re: Legal or no ?
I always assumed you could touch the non invasive side
similar to gassafe and boiler work. You can legally change PCB's and switches etc provided it's not part of the gas side and -if I remember correctly-nor the flue fan which is also 'gassafe' territory
You must be qualified to work on systems and equipment containing fluorinated greenhouse gases (F gas) that the EU regulates.
Stationary refrigeration and air conditioning (SRAC) systems, including heat pump systems
To work on these systems you must be qualified if you want to:
install new systems
service and maintain them
check leaks
recover refrigerant gases
decommission and dispose of old systems