Results 1 to 8 of 8
Threaded View
-
03-07-2018, 02:04 PM #1
Mitsubishi Electric - PKA-RP50HAL
Afternoon,
We have the above unit in our office at work, I notice that there is a blue thermister sensor in the air outlet. Possibly the evaporator sensor. Is this in the correct place or is there a place it should be? See attached picture...
IMG_20180703_141447158.jpg
Just wondering the logic for putting it here, as usually they are mounted on the pipework in a little slot the same as the pipe temp sensor?
Is it better for it to be in this position to read the air off?
According to https://planetaklimata.com.ua/instr/...Manual_Eng.pdf there is just the 3 sensors, evap, pipe & return air sensor.
Unit is working properly but wondered if this is in the right place. The air off is nice and cold.
Thank you.
Richard.Last edited by back2space; 03-07-2018 at 02:17 PM.