});


Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2008
    Location
    Espaņa
    Age
    46
    Posts
    15
    Rep Power
    0

    Need Manual and Spare Parts STL VSM



    Hello everyone, I have a Stal brand screw compressor without a license plate, and according to some documents found on the ship, it's a VSM 51 EB, I'm going crazy without finding anything on the internet, not even the compressor appears, someone you know something?
    Thank you very much.



  2. #2
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,634
    Rep Power
    30

    Re: Need Manual and Spare Parts STL VSM

    Spankyy,
    Check your email, should help you out.
    Need any other information on it let me know.
    Genuine parts Johnson Controls
    Last edited by RANGER1; 07-06-2018 at 09:24 PM.

  3. #3
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,634
    Rep Power
    30

    Re: Need Manual and Spare Parts STL VSM

    Spankky,
    Did you receive email???
    I'm going crazy not knowing

    I checked previous posts & all ask for manuals for the last 10 years.
    I realize english is not first language, but gets a bit boring from this end.
    Last edited by RANGER1; 10-06-2018 at 01:20 AM.

  4. #4
    Join Date
    Jun 2008
    Location
    Espaņa
    Age
    46
    Posts
    15
    Rep Power
    0

    Re: Need Manual and Spare Parts STL VSM

    Hello Ranger1, thank you very much for the manual, is what I was looking for, I do not know if you have any information, regarding the connections of the UNISAB III, I have two mounted on two compressors and none of the two, I activate the signal, to activate the EKC that manages the economizer expansion valve, and I think it is because it is not well connected.

    Thanks again.

  5. #5
    Join Date
    Jun 2008
    Location
    Espaņa
    Age
    46
    Posts
    15
    Rep Power
    0

    Re: Need Manual and Spare Parts STL VSM

    I speak in Spanish and use the Google translator, hahaha, I hope the translator does not make mistakes.
    Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •