Results 1 to 3 of 3
Thread: hoover optima
-
07-06-2006, 05:32 PM #1
amrik Guesthoover optima
hi everyone,the power led has gone out on the pcb..the board has been tested in an identical appliance and is at fault..
as a tv tech i have done alot of cold checks on the board and not found the fault..!
is anyone familer with this fault or no a source where i can obtain a circuit board at a modest cost..
a circuit will be usefull
id on board ...ispracontrols
Amrik
-
07-06-2006, 10:30 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: hoover optima
Hi Amrik and welcome.
Not trying to get rid of you a such but, try this site....
http://www.ukwhitegoods.co.uk
you might find some useful info there.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
16-06-2006, 01:11 AM #3
improving poster
- Join Date
- May 2006
- Location
- Shropshire
- Age
- 56
- Posts
- 34
- Rep Power
- 0
Re: hoover optima
Hi Amrik, I repair these cabinets regularly and i can tell you the best place for an Ispra P.C board for a Hoover/Candy (same company!) is Q.E.R -Quality Electronic Repairs, at Workington, up near the Lake District. If they can't supply you with one they will repair yours. Find them on the web at www.qer.biz
PS: Candy took over Hoover (or visa-versa!) a few years ago. Andy -Shrops
