Results 1 to 3 of 3
Thread: Orings and dimensions
-
26-02-2018, 10:11 AM #1
Orings and dimensions
I sometimes overhaul packing gland on different valves. I have a lot of o-rings, but Danfoss is not giving any information on wich number the o-rings are on each valve. They want to sell the complete packing gland. Is there anybody who can help me with a list for each valvesize and wich partnumber orings have?
-
26-02-2018, 12:59 PM #2
Re: Orings and dimensions
Hi, marthe1994
Maybe you can find here something what can help you:
http://products.danfoss.com/productr...noid-valves/#/
http://products.danfoss.com/productr...spare-parts/#/
Unfortunately spare parts in kits are another way to make some extra profit ...
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
26-02-2018, 06:24 PM #3
Re: Orings and dimensions
If on ammonia NEOPRENE ONLY "0" rings used, you can buy a general purpose neoprene "0" ring kit.
Sectional size of "0" rings mostly 3.53mm, so "British Standard or BS
If you have sample you could select from catalogue, or buy kit & work out from there.
Once worked out buy that particular size to top up kit.
https://www.jameswalker.biz/nl/pdf_d...-guide-issue-7
https://www.amazon.com/Neoprene-Ring...fovinedelta-20Last edited by RANGER1; 26-02-2018 at 06:35 PM.