Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2017
    Location
    South Africa
    Posts
    2
    Rep Power
    0

    Stal S83 slide Pot



    Hi All

    i have come across a Stal S83 which has a faulty slide pot, i have received a new version of the slide pot but without any information of the conversion or wiring connections. i hope someone will be able to help with this information.

    thanks



  2. #2
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,483
    Rep Power
    27

    Re: Stal S83 slide Pot

    A.King,
    Usually supplier like Johnson controls can supply instructions if asked.
    Is it look the same as existing, as there was an older different style which then would require an upgrade kit or older type sensor supplied instead.
    Best to give them serial number of compressor when ordering, as these parts very expensive.

    This is latest I think

    http://www.hbproducts.dk/images/cert...ual-022-UK.pdf
    Last edited by RANGER1; 14-12-2017 at 08:52 PM.

  3. #3
    Join Date
    Nov 2017
    Location
    South Africa
    Posts
    2
    Rep Power
    0

    Re: Stal S83 slide Pot

    Thanks Ranger

    this information is a big help

  4. #4
    Join Date
    Jul 2007
    Location
    Czech
    Age
    55
    Posts
    322
    Rep Power
    12

    Re: Stal S83 slide Pot

    Hello King,
    I'll add Ranger1, big attachment, I'm sending an email.

    Josef.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •