Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2016
    Location
    Bangladesh
    Age
    44
    Posts
    3
    Rep Power
    0

    Emerson PAC networking



    Hi!
    Hope all are well. i just facing a problem about 2 Emerson PAC networking that is how to connect 2 PAC (medium icom board to board) via crossed Ethernet cable? I did set unique IP address, U2U address etc. but it's not working!!



  2. #2
    Join Date
    Aug 2007
    Location
    Russia
    Posts
    138
    Rep Power
    21

    Re: Emerson PAC networking

    Are all the settings like that?
    Attached Files Attached Files
    Last edited by narkom; 14-12-2017 at 01:34 PM.

  3. #3
    Join Date
    Nov 2016
    Location
    Bangladesh
    Age
    44
    Posts
    3
    Rep Power
    0

    Re: Emerson PAC networking

    Thank you, narkom. Yes, all settings are like that. But it's not working. Local Vertive(Emerson) authorised person told me that 'medium board cannot be connected via crossed cable! Is it right?

  4. #4
    Join Date
    Aug 2007
    Location
    Russia
    Posts
    138
    Rep Power
    21

    Re: Emerson PAC networking

    No, it is not. If you can connect a Coldfire display to medium board via crossed cable you can connect two medium boards via crossed cable. Why did you decide it is not working? Is there an Alarm message "Unit ## disconnected" or something else?
    Last edited by narkom; 18-12-2017 at 06:58 PM.

  5. #5
    Join Date
    Nov 2016
    Location
    Bangladesh
    Age
    44
    Posts
    3
    Rep Power
    0

    Re: Emerson PAC networking

    Yes, there is an alarm that is "No connection with unit 01" or "unit 2". but crossed cable is connected and cable is checked and okay.
    Last edited by Bipu; 07-01-2018 at 07:38 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •