Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2014
    Location
    Scotland
    Age
    40
    Posts
    38
    Rep Power
    0

    Mitsubishi Heavy



    Hi, having a issue with this unit. It's not running. I've checked the controller and there is a demand for it to run but it does nothing. I've put the unit in test run from the outdoor unit and the controller says it's in test but nothing.

    S1 and s2 is 230v s2 and s3 is fluctuating from 2v -22v. There are not faults, I have changed the outdoor board but nothing.

    Tried calling MHI and left voicemails but they don't respond. Anyone have a number they answer?

    I have noticed when 2 units in the one controller there can be up to a hour delay but I have waited over.

    Cheers



  2. #2
    Join Date
    Mar 2017
    Location
    Oxfordshire
    Posts
    6
    Rep Power
    0

    Re: Mitsubishi Heavy

    You can still get technical from amp, s1 and s2 230v this your live and natural? I see S3 being transmission line and that fluctuating voltage is right but s2 voltage????

  3. #3
    Join Date
    Jun 2014
    Location
    Scotland
    Age
    40
    Posts
    38
    Rep Power
    0

    Re: Mitsubishi Heavy

    All s1,2,3 voltages are correct.

  4. #4
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,175
    Blog Entries
    6
    Rep Power
    36

    Re: Mitsubishi Heavy

    If you are expecting that someone will read your mind in order to get model number, you will probably wait few more decades until quantum mind reading is invented!

  5. #5
    Join Date
    Jun 2014
    Location
    Scotland
    Age
    40
    Posts
    38
    Rep Power
    0

    Re: Mitsubishi Heavy

    Fdc125vn sorry thought I added that

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •