Results 1 to 6 of 6
  1. #1
    engazaym's Avatar
    engazaym Guest

    sandwich panels production line



    helooo
    i need some help
    we are planning for extending our business ,we search for available production lines " new or used " for sandwich insulation panels injection type un continuous line preferred with vacuum .
    i need the suppliers contact data.

    aymn



  2. #2
    Join Date
    Aug 2005
    Location
    iraq
    Age
    67
    Posts
    131
    Rep Power
    19

    Re: sandwich panels production line

    hi
    here is two companies for isolated panals production, may be they help you

    www.frimatec-isocab.com

    www.misaspa.it

    good luck
    afeef

  3. #3
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: sandwich panels production line

    Hey, Isocab is a Belgium company, based +/- 50 km 's from here.

    They did first businees in flax till 1960 -1970 and started then with the fabricating of modular panels.
    They're owned since several years by the Thyssen Group.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  4. #4
    engazaym's Avatar
    engazaym Guest

    Re: sandwich panels production line

    thank you for your help

    if you know the site of MANNI they are afamous press manufacturing in italy .i think it will help .

  5. #5
    erkanyildirim's Avatar
    erkanyildirim Guest

    Re: sandwich panels production line


    here is two companies from turkiye for isolated sandwich panels for cold room, freezing room, shock room production, may be they help you
    www.izoteknik.com
    www.izopoli.com

  6. #6
    Join Date
    May 2003
    Location
    India
    Age
    55
    Posts
    5
    Rep Power
    0

    Re: sandwich panels production line

    Quote Originally Posted by erkanyildirim

    here is two companies from turkiye for isolated sandwich panels for cold room, freezing room, shock room production, may be they help you
    www.izoteknik.com
    www.izopoli.com
    it is a simple process 60% POLYOL AND 40 PERCENT MDI MIXED TOGETHER IAN INJECTED BETWEEN 2 SHEETS U WILL GET 45 KG %METER CUBE PUF PANELS USE FOAMING AGENT AS PER THE SPECIFICATI ON.

Similar Threads

  1. Suction gas <-> liquid line heat exchange and performance gains
    By DaBit in forum Technical Speculations
    Replies: 30
    Last Post: 18-05-2010, 01:52 PM
  2. Mismatch of line sizes
    By Abe in forum Commercial
    Replies: 15
    Last Post: 03-03-2003, 10:29 PM
  3. Minimal required R134a speed in suction line
    By DaBit in forum CPU Overclockers
    Replies: 32
    Last Post: 08-05-2002, 05:19 AM
  4. Line Sizing and Piping Practice
    By subzero*psia in forum Commercial
    Replies: 1
    Last Post: 22-06-2001, 03:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •