Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Oct 2009
    Location
    Norway
    Posts
    39
    Rep Power
    0

    Aermec gr3 display

    i have five different Aermec units with gr3 display. The units are made between 2007 and 2013.
    the issue is that all of the displays locks/freezes from time to time. So its not possible to use any buttons on the controller.
    when this occurs the modbus card crashes as well, cant read or write anything.

    ive found a temporary solution.
    Turn power off, wait a few minutes and turn power on.

    does anyone have a better solution to the problem that last longer than a few weeks?

  2. #2
    Join Date
    Jan 2011
    Location
    London
    Age
    38
    Posts
    43
    Rep Power
    0

    Re: Aermec gr3 display

    replace the controller

  3. #3
    Join Date
    Oct 2009
    Location
    Norway
    Posts
    39
    Rep Power
    0

    Re: Aermec gr3 display

    I replaced one of the controller, after a few months the same thing happened to it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •