Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2017
    Location
    United Kingdom
    Age
    24
    Posts
    35
    Rep Power
    0

    How to remove fan motor and fan on fujitsu asya14lgc



    I for the life of me can't see how this comes apart filter cover off and filters out there's 2 screws and that's it and it don't come off as the whole cover is solid plastic. I've seen some ****e designs in my time like the old mitsi 407c wall mount but not this bad. Anyone got any experience with these



  2. #2
    Brian_UK's Avatar
    Brian_UK is online now Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    70
    Posts
    10,547
    Rep Power
    52

    Re: How to remove fan motor and fan on fujitsu asya14lgc

    Can't find that exact model size but looking at a 12 there seems to be a plastic coil support and a separate motor support.

    I'm assuming that the electrics have to be removed?

    Motor shaft possibly locked onto fan rotor shaft.

    Good luck.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
    Please support http://the100project.net/Home

  3. #3
    Join Date
    Jan 2017
    Location
    United Kingdom
    Age
    24
    Posts
    35
    Rep Power
    0

    Re: How to remove fan motor and fan on fujitsu asya14lgc

    Right. Will have a look when I'm back ordered the stuff but it just doesn't have any screws I can see. Why are things made so stupidly

  4. #4
    Join Date
    Mar 2001
    Location
    ireland
    Age
    47
    Posts
    1,285
    Rep Power
    34

    Re: How to remove fan motor and fan on fujitsu asya14lgc

    I've found taking them off the wall is the only way, if i remember there are some screws at the rear that release the coil and then fan blade can be removed, same as some Daikin models as well.
    Mostly found in the southern part of this green and pleasant land.

  5. #5
    Join Date
    Apr 2008
    Location
    Southampton, England
    Age
    43
    Posts
    912
    Rep Power
    28

    Re: How to remove fan motor and fan on fujitsu asya14lgc

    Hi Ben,

    Have emailed you the service manual which has a parts layout, might help a bit but might end up in your spam folder first off.
    I haven't done one myself so not sure but on some of the older ones I've taken apart to clean out the drip trays the complete bottom part (number 22 on page 13) came out, easy(ish) when you've cracked the first one out. You might find the coil lifts up a bit and a some bits of plastic unscrew opposite the motor end to get the fan blade out, electrics and trim off to get to the motor and grub screw.

    Cheers,
    Andy.
    Health and safety first..........unless I'm in a hurry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •