Results 1 to 4 of 4
Thread: Stal S83 slide Pot
-
14-12-2017, 02:29 PM #1
Stal S83 slide Pot
Hi All
i have come across a Stal S83 which has a faulty slide pot, i have received a new version of the slide pot but without any information of the conversion or wiring connections. i hope someone will be able to help with this information.
thanks
-
14-12-2017, 07:26 PM #2
Re: Stal S83 slide Pot
A.King,
Usually supplier like Johnson controls can supply instructions if asked.
Is it look the same as existing, as there was an older different style which then would require an upgrade kit or older type sensor supplied instead.
Best to give them serial number of compressor when ordering, as these parts very expensive.
This is latest I think
http://www.hbproducts.dk/images/cert...ual-022-UK.pdfLast edited by RANGER1; 14-12-2017 at 07:52 PM.
-
15-12-2017, 08:05 AM #3
Re: Stal S83 slide Pot
Thanks Ranger
this information is a big help
-
15-12-2017, 04:09 PM #4
Re: Stal S83 slide Pot
Hello King,
I'll add Ranger1, big attachment, I'm sending an email.
Josef.