Results 1 to 7 of 7
Thread: Brema ice machine
Threaded View
-
03-11-2017, 10:20 AM #1
Registered User
Hey, I am new to : RE
- Join Date
- Jun 2013
- Location
- Australia
- Posts
- 8
- Rep Power
- 0
Brema ice machine
Have a Brema ice machine which is not harvesting. The evap was iced over the top and the cubes underneath were oversized and not dropping out. I put the timer into defrost and the hot gas valve turned on for a minute or so then the timer advanced around to the freeze cycle again. I was in a rush and the evaporator thermostat was the only thing I could see that could be the problem but now looking at a picture I took of the wiring diagram I can't see what the evap thermostat even does? I've gone through the different possibilities and it looks to me that it doesn't change a thing if the contacts 3-4 or 3-0(#) are closed based on the wiring diagram. Can anyone tell me different?
