Results 1 to 9 of 9
Threaded View
-
11-10-2017, 06:23 AM #1
Danfoss Aks level Probe and EKC 397 level readings faulty.
Hi Guys.
I have a EKC 397 controller showing 0 level jn a surge drum.
Despite the fact that liquid in the column can be seen.
The m/A value read at U30 is just below 4 m/A hence the level display reading 0.
Any ideas?
I checked the cable connections at each end AKS 4100 to EHC controller.
They appear ok.
I wont be able to reply till this evening, but any help ideas would be appreciated.
GrizzlyDespite the High Cost of Living it still remains Popular!