Results 1 to 12 of 12
Thread: Sabroe 202 LM
-
02-06-2006, 02:38 PM #1
Sabroe 202 LM
Does anyone have the parts break down for a Sabroe 202 LM, I am having problems with the slide valve magnetic coupling on the slide valve pot
-
03-06-2006, 08:32 AM #2
Re: Sabroe 202 LM
Originally Posted by nh3wizard
202LM is this one of the SAB range or is it a stal
I have hard copy manuals for both, and if it is a SAB I have a soft copy manual for a 163F which might be of use.
Kind Regards AndyIf you can't fix it leave it that no one else will:rolleyes:
-
05-06-2006, 12:44 PM #3
Re: Sabroe 202 LM
Ill have to get back with the operator at that location, get back to you soon.
-
05-06-2006, 02:36 PM #4
Re: Sabroe 202 LM
Hi, nh3wizard
SAB 202 LM is Sabroe compressor.
I have a soft copy instruction manual and list of parts with drawings.
Nh3wizard, Andy if you need it send me a PM with email address.
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
05-06-2006, 05:22 PM #5
Re: Sabroe 202 LM
Josip,
I PMed you with my email address, thanks for the info
-
15-08-2006, 06:04 PM #6
Re: Sabroe 202 LM
Gentelmen,
I am looking for a part number for the magnetic coupling used for the slide valve position indicator, this connects to the spindle on one end and to the load postion indicator on the other, I have not had any luck with York / Frick on this. Sab 202 LM
Any help would GREATLY be appreciated.
York finally came through, if any one else needs it let me know and Ill send it to youLast edited by nh3wizard; 15-08-2006 at 09:19 PM.
-
05-11-2010, 11:06 AM #7
Re: Sabroe 202 LM
Josip,
Please kindly email SAB 202 LM service manual to pete@pvt-worldwide.com.
Thank you so much
-
06-11-2010, 04:00 PM #8
Re: Sabroe 202 LM
We just chance that magneticcoupling and there was some improvent made for coupling. New one has some kind plastic tube holding magnets in place. We leave that plastic tube in place and everything works fine. Hope You understand my poor English
-
07-11-2010, 03:12 AM #9
-
10-11-2010, 09:40 PM #10
Re: Sabroe 202 LM
I have access to most Sab manuals certainly 202 let me know if you still require assistance
-
12-02-2011, 07:40 PM #11
Re: Sabroe 202 LM
Please contact johnson controls denmark and ask for tony jørgensen in the repshop , he can helps you. they have a repshop there they repair all models óf SABROE-STAL-GRAM -FRICK COMP.
-
10-03-2011, 05:35 PM #12
Re: Sabroe 202 LM
I would be greatfull if You could please send me the SAB manuals, especially 202, and unisab II and III if possible.
My private e-mail is wojtowiczk@meil.pw.edu.pl.
Regards
K.
Similar Threads
-
New Sabroe (Frick) Screws
By Andy in forum Industrial CompressorsReplies: 22Last Post: 21-05-2008, 04:28 PM -
Sabroe Recip
By Andy in forum Industrial CompressorsReplies: 36Last Post: 06-03-2008, 02:29 AM -
Sabroe CMO28 mk2 comp unloaders
By GENGUS in forum Technical DiscussionsReplies: 2Last Post: 17-11-2006, 01:18 AM -
Sabroe oil filters..grumble, grumble, grumble...
By SteveDixey in forum Industrial CompressorsReplies: 3Last Post: 25-12-2005, 07:49 PM