Results 1 to 12 of 12
  1. #1
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Fan blade puller UK



    Hello everyone,

    i was wondering if anyone could possibly point me in the right direction on where to get a fan blade remover tool in the UK.

    i found plenty in USA with ridiculous postage costs i cant seem to find anything to remove fan blades in the UK.

    Any names of such tools here would be appreciated.

    Thanks

    Rik



  2. #2
    Join Date
    Sep 2010
    Location
    Dorset
    Age
    69
    Posts
    210
    Rep Power
    10

    Re: Fan blade puller UK

    Try searching/Googling for "pulley puller", sold by just about everyone.
    Brian, retired in Devon.

  3. #3
    Join Date
    Feb 2009
    Location
    telford
    Posts
    1,871
    Rep Power
    24

    Re: Fan blade puller UK

    What type of fan is it,is it on the condenser or evaporator

  4. #4
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Re: Fan blade puller UK

    Quote Originally Posted by cadwaladr View Post
    What type of fan is it,is it on the condenser or evaporator
    was just an in general question mate, usually with the condenser motors though.

    Thanks FaultCode i will try pulley puller instead of fan blade remover, thank you

    Rik

  5. #5
    Join Date
    Feb 2009
    Location
    telford
    Posts
    1,871
    Rep Power
    24

    Re: Fan blade puller UK

    Normally the motors are scrapped so I take the motor off cut through the shaft dose it in wd then drive it out with a punch on a vice or over a deep reach socket works everything for me.

  6. #6
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Re: Fan blade puller UK

    Quote Originally Posted by cadwaladr View Post
    Normally the motors are scrapped so I take the motor off cut through the shaft dose it in wd then drive it out with a punch on a vice or over a deep reach socket works everything for me.
    yeah i know what you mean but ive been on a few sites where we've reused the fan so cutting it off the shaft and hammering it out is not always possible on site, i saw some vids on youtube where people used a fan blade remover and i thought it looked alot easier, but when i searched it all i got was american tools but after doing what FaultCode said i found loads of them.

    Thanks for both your help and advice though

    Rik

  7. #7
    Join Date
    May 2012
    Location
    England
    Age
    53
    Posts
    1,220
    Rep Power
    28

    Re: Fan blade puller UK

    .. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..

  8. #8
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Re: Fan blade puller UK

    Quote Originally Posted by Rob White View Post
    Thanks Rob this is the ones i was looking at

    Thanks for everyones help much appreciated

    Rik

  9. #9
    Join Date
    Sep 2010
    Location
    Dorset
    Age
    69
    Posts
    210
    Rep Power
    10

    Re: Fan blade puller UK

    Just be very careful if they have plastic hubs.

    Lots of wd40 and a fair few prayers to your god.
    Brian, retired in Devon.

  10. #10
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Re: Fan blade puller UK

    Quote Originally Posted by FaultCode View Post
    Just be very careful if they have plastic hubs.

    Lots of wd40 and a fair few prayers to your god.
    Lol thanks for the advice i will bear that in mind.

    Rik

  11. #11
    Join Date
    Aug 2006
    Location
    england
    Age
    43
    Posts
    3,781
    Rep Power
    38

    Re: Fan blade puller UK

    I got one on ebay, just had to pay the shipping and tax from the USA, had it for seven years or so so have forgotten what it cost but still find it useful.

    https://www.youtube.com/watch?v=Gy6MmNbw-2c
    Mostly found in Oxfordshire, UK :)

  12. #12
    Join Date
    Feb 2017
    Location
    UK
    Posts
    25
    Rep Power
    0

    Re: Fan blade puller UK

    Quote Originally Posted by monkey spanners View Post
    I got one on ebay, just had to pay the shipping and tax from the USA, had it for seven years or so so have forgotten what it cost but still find it useful.

    https://www.youtube.com/watch?v=Gy6MmNbw-2c
    Ah yeah i have seen that one on ebay, wasnt sure if it was any good?

    Thanks for the link ive already seen that i been subbed to you for a while lol

    Rik

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •